Groen HY-5E 5 Pan Electric Tabletop Convection Steamer

Groen HY-5E HyperSteam Convection Steamer
Ideal for busy kitchens, the Groen HY-5E HyperSteam Convection Steamer provides efficiency like no other!

The Groen HY-5E HyperSteam Convection Steamer is an electric-heated pressure-less steamer with one (1) compartment. It is capable of holding five (5) 12-inch x 20-inch x 2-1/2-inch pans. Alternatively, it can hold ten (10) 12-inch x 20-inch x 1-inch pans or three (3) 12-inch x 20-inch x 4-inch pans. Made for table top use, the unit has an overall width of 21-5/8 inches, depth of 30-1/8 inches, and height of 22-1/2 inches. It also has a weight of 210 pounds. It features a stackable design, which allows multiple units to be stacked over each other. It is fully constructed with stainless steel—from the cabinet to the steamer cavity.
For easy access to internal components, the Groen HY-5E HyperSteam Convection Steamer is equipped with removable right and left-side panels. To accommodate to any kitchen layout, it also has continuous-hinged door that is field-reversible for right or left-side swing. It is designed with easy-open handle and latch to provide positive lock and seal when the door is pushed or slammed shut as well. To keep the door secured and air-insulated, it is also lined with a one-piece replaceable seal. Additionally, it a hidden magnetic door switch cuts power to the blower and generator whenever the door is opened. This allows a more energy-efficient operation. Moreover, the unit is provided with pan support racks polished with stainless steel. A condensate collection tray of the same material is also positioned under the cavity door.
The Groen HY-5E HyperSteam Convection Steamer showcases a #3 uniform finish for the cabinet exterior including the door. Meanwhile, the cavity interiors present a polished stainless-steel finish. For an attractive and easy to clean control panel, the face plates are made of smudge-resistant polyester film. The controls include an on-off power button and a 60-minute electro-mechanical timer with continuous steam setting. For user convenience, it also has a ready indicator light, which alerts users when the cavity is ready for steaming. Under normal conditions, the heat time up is between 8 to 10 minutes or less. It also has an AutoDelime button with an indicator light to warn operator of deliming.
The Groen HY-5E HyperSteam Convection Steamer is designed with a self-contained, rear-mounted atmospheric steam generator. It provides atmospheric steam with temperature of approximately 212 degrees Fahrenheit. For a safe operation, it is equipped with an electric water sensor to measure the water level. If the water level reaches low, the unit will automatically shut down. Once the power switch is turned off, the steam generator is then automatically blown down to reduce sediment build-up. Additionally, it is crafted with a side-mounted blower. This measures the steam velocity and provides efficient steam. The unit is configured for circuits with specifications of 208 volts, 60 hertz, 3-phase electrical supply. It also requires an input of 15.5 kilowatts and 44 amps per usage. It delivers a power input of 3.1 kilowatts per 2-1/2-inch deep steam pan. It is made for dual water connection.